New radio and MCP panel

The refactoring the radio and MCP panelsis finally completed. You can see a snapshot of the previous situation in this post. The radios were in the left side in two white wodden frames. The MCP and the EFIS were below the two monitors in a very big wodden box bought from Ikea a lot of time ago.

The idea was to have a new box with the EFIS and the MCP in the upper side and the radios at the bottom.The new panel is shown by the following picture.

As you can see the new panel is much more compact. The little screwed panel in the upper left side is intended to contain some buttons controlled via opencockpit. That panel is not as wide as I hoped so I think I will put there not more then 4 buttons. For sure it will contain the master switch and the toga.

Just behind the webcam there is the power switch and another switch to close the contacts of the dip switches of the CPFlight MCP for upgrading the firmware.

The wood is painted with a water paint and the color is RAL7043. The new CPFlight radios have almost the same color of the panel while the old ones, the MCP and the EFIS, are quite different. However the final result is not bad and for sure much better then the original situation.

Yesterday night I made my first flight with the new panel, from EHAM to LIMC. I took this photo while climbing to final FL310 under Brussel CTR:

You can see the panel back lighted. In the left screen the VC and in the rigth monitor IVAP, the FMC and the radio panel. Most of the time, I use the left monitor to browse the charts.

Just upon the rigth screen you can see the three leds of the cabin light, the read and white beacons from the opencockpits light panel.

Refactoring of the MCP/EFIS/RADIOS panels

It seems that next week I have to put all my stuff out of the shelf :(

I'll take the chance to fix the not working button of the light panel. At the same time I want to change the setup of the MCP, EFIS and radios. Current setup was in fact a temporary solution that is in place for more then one year. 

The idea is to create a wodden frame having the MCP and the EFIS in the upper side and the 4 radio modules at the bottom. If I have enought space, I will insert some controls in the upper side of the panel. I am thinking of the master switch and GA button or the annunciators or something else. The new panel, painted in RAL 7043, will be placed below the 2 monitors, where the MCP and EFIS are at the present. Giving that I already have at home all the wood I need, i guess that this remake will last for some days only. 

At the end, I will have the left side free for new panels and space on the left for e new panel that I am designing right now.

My idea for this new panel and for the following is to be modular. I mean that frame of the panel will be fixed and sub-panels will be mounted. In this way it will be possible to unmount a sub panel for upgrading or fixing without the need of open everything. Actually, this is nothing new...

Beside this refactoring, I am thinking of a new panel to put on the right side of the MCP/radios panel. I ahve thought a little bit on what controls I have to put in and I am now focused on the engines startup, the gera lever and myabe the flap. I have brosed the net for componets and I have found a gera for the 767 for 280EUR. It is crazy so I am going to build my gear level from scratch and depending on the result I will build a flap lever too.

I am quite disappointed fro the prices of hardware components on the net. Specialised web sites have crazy prices and I am probably not the best to browse electorinc web sites...